1.Less floor space; easy and stable operation; rational configuration; convenient installation.
2.High processing capacity and efficiency.
3.Moisture proof, antirust, corrosion resistant, adaptive, noiseless.
Spiral Chute Application:
Spiral Chute is suitable for the separation of 0.3-0.02 mm fine iron ore, ilmenite, chromite, pyrite, zircon, rutile, monazite, phosphorite B, tungsten ore, tin ore, tantalum ore, niobium ore and other non-ferrous metals with different specific gravity, It has the advantages of stable separation process, easy control, large allowable range of ore concentration change, high enrichment ratio and high recovery rate. Rare metal and nonmetallic mineral bodies.
Ratio of screw pitch to diameter
Spiral head number
Feeding Particle Size (mm)
Processing Capacity (ton/hour)
The spiral chute is set up vertically, Using iron frame or wood is fixed in the appropriate position, and the sand pump is used to deliver the ore sand to the two feed outlets on the top of the screw, adding supplementary water to adjust the concentration of the mineral propeller, and the mineral oars flow naturally from high to down. A kind of inertial centrifugal force is produced in the velocity of rotating inclined plane. By the difference of specific gravity, particle size and shape of ore sand, the ore is separated from the sand by the action of swirl gravity and centrifugal force, and the concentrate flows into the concentrate hopper through the pipe. The tailings flow into the tailings bucket is connected to the sand tank, then discharged by sand pump, the whole process of ore dressing is completed.
1. small area occupation,
2. less water consumption,
3. simple structure, no power,
4. large handling capacity, easy installation,
5. convenient operation and quick investment.