Industrial Rotary Dryer
1. High drying rate. The drying rate can reach 97%.
2. Three different kinds of heating method. Coal heating, gas or LPG heating and diesel heating.
3. Lifting plate have angle distribution and perfect design, reliable performance so heat rate utilization is high, uniform drying, fewer cleaning materials.
Industrial Rotary Dryer Introduction:
The heat source of the industrial rotary dryer comes from the combustion device. Therefore, the material that needs to be dried, from the feed box, feed into the barrel, that is, after the screw plate. Due to the tilting of the dryer, the material flows to the back end under the action of gravity and rotation on the one hand, and on the other hand, the material is repeatedly copied up by the plate, and then continuously spread down to the upper end, so that the material forms a uniform curtain in the tube. Full heat exchange with the heat flow in the cylinder, because the material repeatedly spread, the moisture contained is gradually dried, so as to achieve the purpose of drying.
Size of cylinder
Rotate Speed (r/min)
Angle of Inclination(%)
The industrial rotary dryer consists of a rotating drum driven by a belt around which hot air evaporates moisture. The cylinder of the industrial rotary dryer adopts the principle of positive and reverse rotation of the drum to achieve the non-winding effect of drying articles. In the early stage, it has been eliminated in China, and modern drying is controlled automatically by computer. According to different drying requirements, different drying temperature and drying time can be configured. The roller is made of stainless steel bright plate with good heat resistance. The inner wall is smooth, which can reduce the wear of clothing. High efficiency radiator, with reasonable air intake channel, make hot air directly contact with material, large Greatly improved drying efficiency, while saving energy. Large diameter inlet, easy to enter and exit materials. A large area of plush collection network, not easy to cause plush clogging, to protect the smooth passage of air, thus greatly improve the drying efficiency.
1.Specially designed lifting flights to maximize heat transfer between the material and hot gas stream.
2.Heavy duty design and construction for many years of service.
3.Process and Mechanical Warranties.